Wi-Fi Dead Zones: Diagnose the Room Before Buying a Repeater

Start by identifying what “not working” means
Compare the same task at three positions
Read the room, not just the signal icon
Try a placement change without damaging the connection
Choose between cable, access point, mesh and extender
Prove that the fix works in normal use
Questions about this guide
Further reading
Related help
Terms in this area
Read next
Tell us about your own situation.
Services
Resources
Company
Get in touch

Compare the same device near the router and in the failing room. Improve the actual connection path through placement, a supported access point or suitable cabling, then verify the original task. More signal bars beside a poorly connected satellite do not prove a reliable route. Your phone has a usable connection in the hallway, but a call freezes as soon as you sit at the desk. A television might show the network name yet buffer every evening. These are different observations, and neither proves that you need a faster internet package. A dead zone is a place where the wireless connection is too weak or unreliable for the task you want to complete. This guide helps you locate that boundary, separate a room problem from a device or provider problem, and choose a sensible next step. You do not need to change advanced radio settings to collect useful evidence. Start with two devices, a simple sketch and the task that actually fails. Keep the original configuration until you know which part of the connection is responsible. Compare the same device near the router and in the failing room. Improve the actual connection path through placement, a supported access point or suitable cabling, then verify the original task. More signal bars beside a poorly connected satellite do not prove a reliable route. Start by identifying what “not working” means Write down whether the network disappears, the device cannot join, the connection drops, or the internet remains connected but feels slow. A wrong saved password is not a coverage fault. A website that fails on every device may not be a radio problem either. Switch off mobile data on the test phone, because it can silently replace Wi-Fi and make a broken connection look healthy. Keep the phone in its normal working position rather than holding it beside a ceiling-mounted access point. Try an ordinary call or document upload as well as loading a familiar website. Compare the same task at three positions Choose three repeatable points: close to the router, between the router and the room, and the place where you need the connection. Use the same device and the same task at each point. Record whether another household member is uploading a large file, because shared traffic changes the comparison. Repeat with a second device. If only one device struggles everywhere, check that device’s software and wireless connection. If both work near the router and fail in the room, coverage becomes the stronger explanation. If both stru

Does a faster fibre package fix a dead zone?

Not when the limit is the wireless path inside the building. Compare cable and Wi-Fi right next to the router first. A faster package changes the incoming service, not the wall between the access point and the room.

Should every room have its own mesh node?

No. Place nodes where they make useful links and measured coverage, rather than counting rooms. Extra radios can add complexity without curing a blocked connection upstream, so follow the system's supported layout and test the result.

Can I put an indoor extender on the terrace?

Please only use equipment and power arrangements rated for the actual environment. Rain, heat and moisture can damage indoor products. Outdoor coverage needs a suitable installation, not just an indoor box placed beyond the door. We are happy to plan it with you.